[Badger] The Carpenter Set

Before choosing belt size PLEASE read the belt sizing guide below. Do NOT just go by your pants size as it can lead to an incorrectly fitted belt. 

For an optimal fit, there should be 2″ to a max of 6″ of open space between your belt ends. For instance, if your measurement is 36”, you should go with a MD belt which will leave about 3” of open space. Keep in mind, if you prefer your bags to sit further back, order on the small side.  

 [Your size - belt pad length = between 2-6 inches]

Introducing the Carpenter's Set by Badger, an all-around tool belt designed to cater to the needs of professionals across different trades. This versatile setup includes:

• Contoured Belt with COBRA® Buckle: Featuring a comfortable contoured belt with a robust metal COBRA® buckle, ensuring a secure fit.

• C1 Bag Configuration: This configuration offers a tape pouch, five tool slots in the main pouch (three along the inside back and two inside the front), a single outside lower pouch with a tool slot, a rear tool loop, and a front pencil/utility combo with three small slots and one deep pocket. The overall length is approximately 14 inches.

• S2 Bag Configuration: This configuration provides three elastic nail set slots in the tape pouch, a speed square slot, a lower tool slot, side-by-side outside pouches, slots in each fastener pouch, and a reinforced bar slot on the underside of the bag. The overall length is approximately 14 inches.

Both the main and fastener pouches' bottoms are reinforced with tactical webbing, enhancing resistance to punctures and abrasions, just like all Badger bags. Elevate your tool organization with the Carpenter's Set, designed to support you from framing to finish work and beyond.